Heartthrob Exhaust Deep-Tone Dual Kits

Split rear design with a y-pipe and glass pack mufflers in the tips. Our best-selling systems, for a deep, throaty sound that is aggressive under heavy acceleration, but great at cruising speed. Aluminized mandrel bent 2-1/4" tail pipes. Now available in 409 stainless steel with 304 stainless steel angle cut muffler tips for most applications. All necessary pipes,hangers, clamps, muffler tips, hardware, and instructions included. Tips are 3.5 inches in diameter x 22 inches long. These systems clear spare tires and trailer hitches.

Note: the 409 stainless steel kits come with 304 stainless steel angle cut muffler tips.

If you click on the vehicle description it will bring up installation pictures if available. Click on the part # to bring up the instruction sheets.

Watch us on YouTube

Dodge Truck Applications

**Click the the headings below to sort the table by Part # or Application**
Applications
 Stainless Angle Stainless Blunt Painted Blunt 409 s/s kit
1994-2001 Ram with V6, 5.2L, 5.9L V8
 1005600 1005500 1005000 1405600
2002-2005 Ram with V6, 4.7L, 5.9L V8--1/2 ton only
 1005550 1005555 1005560 1405550
2003 Ram with 5.7L Hemi, 1/2 ton only
 1005570 N/A
 1005580 1405570
2003-2009 Ram with 5.7L Hemi, 3/4 ton only 2500
 1005590 N/A
 1005595 N/A
2004-2008 Ram with 5.7L Hemi, 1 ton only 3500
 1005590
 N/A 1005595
 N/A
2004-2005 Ram with 5.7L Hemi--1/2 ton only
 1005700 N/A
 1005705 1405700
2006-2008 Ram with 5.7L Hemi--1/2 ton only   1005800 N/A 1005805 N/A
1990-1991 Dakota with V6, V8
 1005010 N/A
 1005020 1405010
1992-1993 Dakota with V6, V8
 1005510 N/A
 1005520 1405510
1994-1996 Dakota with V6, V8 1005010 N/A
 1005020 1405010
1997-2000 Dakota with V6, V8--4WD only
 1005050 N/A
 1005060 1405050
2001-2004 Dakota with V6, V8 1005055 N/A
 1005065 1405055
2005-2008 Dakota 131.5" w.b. w/3.7L V6, 4.7L V8 1005070 N/A
 1005075 1405070

1005600 Kit Deep-Tone Kit


Ford Truck Applications

**Click the the headings below to sort the table by Part # or Application**
Applications Stainless Angle Stainless Blunt
 Painted Blunt 409 s/s kit
1980-1996 with 6 cyl., 302 & 351 V8 F150/F250 with 2 1/4" at back of cat**
 1004360 1004455 1004400 1404360
1997 with V6, 4.6L & 5.4L V8 F150/F250*
 1004655 1004555 1004100 1404655
1998 with V6, 4.6L & 5.4L V8 F150/F250* 1006060 1006070 1006090 1406060
1999-2003 F150/F250 w/V6, 4.6L, 5.4L V8*      sound clip of 4.6L V8
 1007000 1007010 1007030 1407000
1987-1996 Super Duty 3/4 & 1 ton 351 & 460 with 2 1/2" at back of cat
 1004465 1004470 1004475 N/A
1999-2001 Super Duty 5.4L & V10 3/4 & 1 ton with 3" at back of cat 1007040 1007050 1007070 1407040
1982-2010 Ranger with 4 cyl., V6, muffler-back kit 1007390 N/A
 1007400 1407390
1987-1996 Bronco with 6 cyl., 302, 351 V8
 1007440 N/A
 1007430 N/A
2001-2005 Explorer Sporttrac 4.0L V6 1007410 N/A
 1007420 N/A
2004-2008 F150 only w/4.6L, 5.4L V8*           sound clip of 5.4L V8   1007080 N/A
 1007090 1407080
2009-2010 F150 w/4.6L, 5.4L V8             sound clip of 5.4L V8
1004580
 N/A 1004590
 N/A
2011-2014 F150 w/3.7L V6, 5.0L V8
1004580
1004590
* will not fit Super Duty or Lightning
**not for vehicles with dual fuel tanks
Note: the 409 stainless steel kits come with 304 stainless steel angle cut muffler tips.

1006060 Kit


GM Truck Applications

**Click the the headings below to sort the table by Part # or Application**
Applications
 Stainless Angle
 Stainless Blunt Painted Blunt 409 s/s kit
1973-1987 with 305 and 350 V8 Engine-- w/2-1/2" exhaust at cat, 1/2 & 3/4 ton pickup
 1004370 1004375 1004385 1404370
1988-1993 Pickup 1/2 & 3/4 ton  w/350 only and 3" slip fit at back of converter    1008450 1008350 1001350 1408450
1994-1995 with 4.3L V6, 305, 350 V8 muffler-back kit, 1/2 & 3/4 ton pickup
 1008451 1008351 1001351 N/A
1994-1995 with 4.3L V6, 305, 350 V8 cat-back kit, 1/2 & 3/4 ton pickup    1001353 1001352 1001852 1401353
1996-1998 with 305 V8 muffler-back kit, 1/2 & 3/4 ton pickup    1008451 1008351 1001351 N/A
1996-1999 with 350 V8 and 2" dual at cat, muffler-back kit, 1/2 & 3/4 ton pickup    1009450 1009350 1002350 N/A
1996-1999 with 350 V8 and 2" dual at cat, cat-back kit, 1/2 & 3/4 ton pickup    1009451 1009351 1002351 1409451
1999-2006 w/4.3L, 4.8L, 5.3L V8 muffler-back kit (welding req., all wheel bases), 1/2 & 3/4 ton pickup, 2-3/4" single at flange   (welding required)                          1005740 1005750 1005720 N/A
1999-2006 w/4.3L V6, 4.8L, 5.3L V8 reg. cab long box cat-back kit, 1/2 & 3/4 ton pickup   1005745 1005755 1005725 1405745
1999-2005 w/4.3L V6, 4.8L, 5.3L V8 ext./crew cab short box, cat-back kit, 1/2 & 3/4 ton pickup
 1005741 1005751 1005721 1405741
1983-2004 S10 w/4 cyl. and V6, muffler-back kit--excluding ZR2 models 1007350 N/A
 1007360 1407350
1992-1995 Suburban with 3" slip fit at back of converter 1008000 N/A
 1008010 N/A
1994-1995 Suburban with 2-3/4" flanged fit at back of converter 1008020 N/A
 1008030 N/A
1988-1993 pickup 1/2 and 3/4 ton w/4.3L V6, 5.0L V8 and 2-1/2" exhaust at converter 1008040 N/A
 1008050 1408040
2002-2006 Avalanche, 2001-2006 Suburban, Yukon XL w/4.8L, 5.3L V8 1/2 ton  1008060 N/A
 1008070 N/A
Note: the 409 stainless steel kits come with 304 stainless steel angle cut muffler tips.

Apr24$28 gm1 Image


Mazda Truck Applications

Applications
 Stainless Angle Stainless Blunt Painted Blunt 409 s/s kit
1994-2009 B series muffler-back kit
 1007390 N/A
 1007400 1407390


Nissan Truck Applications

Applications
 Stainless Angle
 Stainless Blunt
 Painted Blunt
 409 s/s kit
2003-2006 Titan w/5.6L King and Crew Cab models, 2 & 4WD, muffler-back kit 
1001160 N/A
 1001165 1401160


Toyota Truck Applications

Applications
 Stainless Angle Stainless Blunt Painted Blunt 409 s/s kit
2000-2006 Tundra with 3.4L, 4.7L extended cab with short box only         
1001150 N/A
 1001155 1401150
2010-2015 Toyota Tundra 5.7L/4.6L Crewmax Short Bed

Link to test drive with kit installed		 1001170 N/A
 1001175 N/A
Note: Unless noted, kits are cat-back, fit standard full sized pickup trucks, fit all wheel bases, both 2 & 4wd models, 1/2 and light duty 3/4 ton, no diesels, and no V10. Chrome blunt and angle cut available in weld-on. The 409 stainless steel kits come with 304 stainless steel muffler tips.